Kemppi FastMig Pulse 350 - Manual (Page 20)

EN
WFMotorWarnLev 1.5 – 5.0 A Factory Setting: 3.5A The alarm level of wire feed motor current.
Check/service wire feed mechanism,
adjustment and gun components.
WF End Step ON/OFF Factory Setting: OFF ON: The filler wire steps forward at the end
of the welding cycle.
OFF: Filler wire remains static at the end of
the welding cycle.
AutoWireInch ON/OFF Factory Setting: ON Automatic SuperSnake Wire Inch feature.
When ON, the Wire Inch button drives the
filler wire automatically up to SuperSnake.
Gas Guard ON/OFF Factory Setting: OFF Turns the gas guard on and off, provided
that one is installed.
ADMINISTRATOR MENU
Change PIN Code Administrator pin code
change. Factory PIN code: 0000
Ask PIN PIN code inquiry selection:
OFF / StartUp / Menu Factory Setting: OFF OFF: No PIN code inquiry.
StartUp: Setup panel (P65) always asks for
the PIN code when the machine is turned
on. PF 65 is not affected and always works
without PIN.
Menu: Setup panel (P65) asks every
time for PIN code when MENU button is
pressed and when the display is in channel
info mode i.e. in start-up view. PIN code
inquiry is made only once when entering
the menu. After that the menu button can
be pressed any time without PIN inquiry.
4.3.3 Welding software delivery profile
FastMig Pulse is designed to allow customer specified welding software choice. Following
delivery and installation your machine will include welding software specified at the point of
order. The tables below show typical welding programs, but there are more of them available.
Please check availability from your supplier. If the delivery specification is focused to a specific
project and you wish to update the machine in the future, you can select additional welding
software from the Wise & Match software products. Order and load these software products to
your machine with Kemppi DataGun field program device.
Wise and Match products provide optional welding application solutions. Wise and Match
products menu includes special weld process for (1) root pass and (2) thin plate welding, (3)
auto power regulation and (4) arc length recognition, (5) minilog function, plus additional
base material welding programs and optional panel function.
1. WiseRoot 6265011
2. WiseThin 9991013
3. WisePenetration 9991000
4. WiseFusion 9991014
5. MatchLog 9991017
Kemppi DataStore offers new welding software packages and special enhanced arc
performance solutions. Customization of FastMig Pulse systems can make welding more
efficient. Solutions offered are designed to meet the needs of wide ranging welding
environments.
You can order materials specific welding programs and/or Wise solutions separately through
Datastore or via your local supplier.
FastMig Pulse 350, 450
18