Denon AVR-789 User Manual

Page 83

Get
ting Star

ted

Connections

Set
up

Pla
ybac

k
Remot

e Contr

Multi-z

one

Inf
or

mation

ENGLISH

Specifications

Symptom

Cause

Countermeasure

Page

No picture
appears.

• The connections between the

AVR-789 and monitor are faulty.

• The monitor’s input setting is

wrong.

• PURE DIRECT mode is set.
• The player is connected using the

component input connectors, the
monitor is connected using the
video (yellow) or S-Video output
connectors.

• Check the connections.

• Set properly.

• Cancel the PURE DIRECT mode.
• High definition (1080i/720p) and

progressive (480p/576p) video
signals are not down-converted.
Set the player to interlace
(480i/576i) signals.

11 ~ 14

–

Picture cannot be
recorded.

• Input source does not match

recorder’s video connection
connector (video or S-Video).

• The video conversion function

does not work for the REC
OUT connectors. Match the
input source and recorder
connections.

DVDs cannot be
copied on a VCR.

–

• This is not a malfunction. Most

movie software includes copy
prevention signals and cannot be
copied.

–

On-screen

display is not

shown.

• The operation content display is

“OFF”.

• The main volume display is

“OFF”.

• The display during tuner operation

is “OFF”.

• The display during iPod operation

is “OFF”.

• When

viewing

HDMI

component video signals via the
AVR-789, the on-screen display
appears when the

MENU

button

on the main unit or the

A.MENU

button on the remote control
unit.

• When only HDMI or component

video signals are input to the
AVR-789, the characters of
the on-screen display are not
displayed over the picture.

• Set “Manual Setup” – “Option

Setup” – “On-Screen Display”
– “Text” to “ON”.

• Set “Manual Setup” – “Option

Setup” – “On-Screen Display”
– “Master Volume” to “ON”.

• Set when “Manual Setup”

– “On-Screen Display” – “Tuner
Information”is not “OFF”.

• Set when “Manual Setup”

– “On-Screen Display” – “ iPod
Information” is not “OFF”.

VideoH

Symptom

Cause

Countermeasure

Page

HDMI audio
signals are not
output from
speakers.

• The “Manual Setup” – “HDMI

Setup” – “HDMI Audio Out”
setting is set to“TV”

• Set to “Amp”

No picture
appears
with HDMI
connections.

• The connections to the HDMI

connectors are faulty.

• HDMI input setting is improper.
• The monitor is not compatible

with

protection

(HDCP).

• The HDMI format of the player

and monitor do not match.

• Check the connections.

• Check the HDMI input setting.
• Connect a monitor that is

compatible

with

protection (HDCP).

• Match the HDMI format of the

player and monitor.

No sound is
output from
the monitor
connected
with HDMI
connections.

• The “Manual Setup” – “HDMI

Setup” – “HDMI Audio Out”
setting is set to “Amp”.

• Set to “TV”.

When performing
the following
operations on a
connected device,
AVR-789 has the
same operations.

⋅ Power ON/OFF

⋅ Switching audio

output devices

⋅ Adjust volume

⋅ Switch input

source

• HDMI’s

CEC

function

operating.

• Set “Manual Setup” – “HDMI

Setup” -– “HDMI Control” to
“OFF”.

When you only want to operate

the power on/off each device, set
“Power Off Control” to “OFF”.

HDMIH