Denon AVR-789 User Manual
Page 57
Get
ting Star
ted
Connections
Set
up
Remot
e Contr
ol
Multi-z
one
Inf
or
mation
Tr
oubleshooting
ENGLISH
Specifications
ENGLISH
Pla
ybac
k
1
Either turn
or press
[SAT TU 1/2]
to select “SIRIUS”.
2
Set
[SOURCE CONTROL 1]
to “AUDIO” and
[SOURCE
CONTROL 2]
to “TUNER”.
(vpage 61 “Remote Control Unit Operations”)
3
Use
TUNING
to select the channel.
When the channel is tuned in, the name of the track and artist
are displayed.
Basic Operation
• The channel switches continuously when
TUNING
is pressed and
held.
• The song title, artist name, composer name, category and reception
level can be checked by pressing
.
• The time (default : 30 sec) for which the on-screen display are
displayed can be set at menu “Manual Setup” – “Option Setup”
– “On-Screen Display” (vpage 32).
Press uio p to return to the original screen.
Checking the SIRIUS Signal Strength
and Radio ID
1
Either turn
or press
[SAT TU 1/2]
to select “SIRIUS”.
2
Press
until “SIGNAL” appears on the
display.
The display will switch as shown below, depending on the
reception conditions.
Display
Status
EXCELLENT
Signal strength is excellent
GOOD
Signal strength is good
WEAK
Signal strength is weak
NO SIGNAL
No signal
3
Adjust the position of the antenna until “SIGNAL:
EXCELLENT” is shown on the display.
4
Press
until the channel you want to check
(example: “SR001”) is displayed.
5
Press
TUNING
and select channel 0 (SR000).
Channel No. and Sirius ID are alternately shown on the display.
SR000 SiriusID
************
b
Write your own SIRIUS ID for storage use.
Sirius ID :
Radio ID
The strength of both the SIRIUS and terrestrial signals can be checked
at menu “Input Setup” – “Antenna Aiming” (vpage 39).
Presetting Radio Channels
(Preset Memory)
Your favorite broadcast channels can be preset so that you can
tune them in easily. Up to 56 channels can be preset.
1
Tune in the broadcast channel you want to preset.
2
Press
[MEMORY]
.
3
Press
SHIFT
to select the block (A to G) in which the
channel is to be preset.
4
Press
or
[CHANNEL +/–]
to select the
preset number (1 to 8).
5
Press
[MEMORY]
again to complete the setting.
To preset other channels, repeat steps 1 to 5.
NOTE
Preset channels are erased by overwriting them.
1
Press
SHIFT
to select the memory block (A to G).
2
Press
or
[CHANNEL +/–]
to select the
desired preset channel (1 to 8).
Listening to Preset Channels