Kanguru U2D2 - Manual (Page 10)

10
6. During the duplication process you can view the following information displayed on the LCD
screen:
Time remaining
Amount of data
to be copied
Percentage
Completed
7. Once the duplication job has completed the screen will display the following:
Number of successful
duplications
Number of failed
duplications
Total # of duplications
made in this job
Drives that completed successfully will have a green LED displayed next to it, indicating that there
were no errors on that drive. Drives that failed the duplication process will have a red LED next
to it.
8. Remove all the target drives and you will return to the main menu. If you have more USB devices
to copy, repeat steps 3 - 8 until your project is complete.
9. Press the ESc button to return to the main menu.
Synchronous Copy