General operation – Kanguru QS2 v1.1 User Manual
Page 7
7
2. General Operation
Please carefully read the following instructions and make sure you understand them completely. For
ease of use, please print this manual for reference.
To setup your Kanguru external hard drive:
1. Connect the power adapter from your external hard drive to an electrical outlet.
2. Push the On/Off button to power on the hard drive.
3. Connect the hard drive to your computer using either the USB cable or the eSATA cable provided.
There are two ways to connect your Kanguru hard drive: through eSATA as an external SATA device
or through USB as a removable USB device. Both connection methods are described in the following
sections.
General Operation