Kanguru QSX Assembly Guide - Manual (Page 3)

3
Preparation
1. Preparation
Note: This guide is for assembling your QSX only. For complete instructions on using your drive
after it is assembled, please refer to the User Guide.
Before assembling your QSX, please check that you have the following items available on hand.
1 x QSX Enclosure
2 x SATA HDDs
(same capacity and model
recommended)
8 x HDD Screws
Phillips head screwdriver
The QSX Enclosure and HDD Screws are included with your package. You will need to provide
your own SATA HDDs and screwdriver. It is advised to install 2 SATA HDDs of the same capacity,
manufacturer and model.