Kanguru Bio AES User Manual

Page 21

10.2.1. Password Settings

To change your password, first enter your current password in the box labeled Old

Password, then enter the new password you wish to use in the New Password box.

Finally, confirm this new password once more and once all three fields are completed

appropriately, click the button. A pop up window will notify you that the

password change was performed successfully.

10.2.2. Fingerprint Settings

To add a new fingerprint, click the finger you wish to add or type the number that

corresponds to the finger you wish to add. The finger tip will blink gray when

selected.

Once the finger you wish to add is selected, slide the correct fingerprint across the

sensor. In order to enroll the fingerprint correctly, you will be required to slide the

finger top across the Kanguru BioAES sensor a minimum of 3 times. If you have

trouble, please press the See fingerprint enrollment tutorial button to view a quick

tutorial on how to enroll a fingerprint.

To delete a fingerprint record, simply click the tip of the finger that you wish to delete

or press the corresponding number key. These fingers should have a green fingernail

tip. When prompted if you are sure you wish to delete, click YES.