Denon DVM-2815 - Manual (Page 25)

– 25 – EN
English
DVD SETUP
Language options are not available with some discs.
Press the SETUP button in STOP mode.
Press the B button to select CUSTOM, then press the
ENTER button.
• CUSTOM mode will appear.
Press the s or B button to se-
lect LANGUAGE, then the EN-
TER button to confirm.
Press the K or L button to select the below items,
then press the ENTER button.
DIALOG (Default : ORIGINAL)
• Sets the audio language.
SUBTITLE (Default : OFF)
• Sets the subtitle language.
DISC MENU (Default : ENGLISH)
• Sets the language for DVD Menu.
OSD
(Default : ENGLISH)
• Sets the language for the On-
Screen display.
Press the K or L button to select a setting, then
press the ENTER button.
• If OTHERS is selected in the AUDIO, SUBTITLE or DISC
MENU screen, press four-digit number to enter the code for
the desired language. (Refer to the language code list below).
• Only the languages supported by the disc can be selected.
Press the SETUP button to exit.
NOTE:
• Language Setting for Dialog and Subtitle is not available
with some discs. Then use the AUDIO and SUBTITLE but-
tons.
Details are on pages 22 and 23.
6
5
QUICK
4
3
2
1
LANGUAGE
DIALOG ORIGINAL
SUBTITLE OFF
DISC MENU ENGLISH
OSD ENGLISH
Language Setting Display Setting
You can change certain aspects of the DVD display screens, on-screen
messages and the display panel on the front of the DVD player.
Press the SETUP button in STOP mode.
Press the B button to select CUSTOM, then press
the ENTER button.
• CUSTOM mode will appear.
Press the s or B button to se-
lect DISPLAY, then the ENTER
button to confirm.
Press the K or L button to select the below items, then
press the ENTER button.
TV ASPECT (Default : 4:3 LET-
TER BOX)
• Press the K or L button for an
item selection, then press the EN-
TER button.
• Select 4:3 LETTER BOX for a
black bars appears on top and bottom of the screen.
• Select 4:3 PAN - SCAN for a full height picture with both sides
trimmed.
• Select 16:9 WIDE if a wide-screen TV is connected to the
DVD player.
PANEL DISPLAY (Default :
BRIGHT)
• Press the K or L button for an
item select BRIGHT, DIM and AU-
TO DIM, then press the ENTER
button.
• This adjust the brightness of the
display panel with the factory default BRIGHT.
• When AUTO DIM is selected, the display dims only during playback.
ANGLE ICON (Default : ON)
• Press the ENTER button repeat-
edly to turn Angle mark ON or
OFF.
AUTO POWER OFF (Default : ON)
• Press the ENTER button repeat-
edly to turn Auto Power ON or
OFF.
• It will turn the DVD player to off au-
tomatically after 35 minutes of no
use.
Press the SETUP button to exit.
NOTES:
• Be sure to press the SETUP button, or the setting will not work.
• You can also choose the item by pressing the numbers.
5
QUICK
4
3
2
1
DISPLAY
TV ASPECT 4:3 LETTER BOX
PANEL DISPLAY BRIGHT
ANGLE ICON ON
AUTO POWER OFF ON
LANGUAGE
DIALOG
ORIGINAL
ENGLISH
FRENCH
SPANISH
GERMAN
ITALIAN
SWEDISH
L
LANGUAGE
SUBTITLE
OFF
ENGLISH
FRENCH
SPANISH
GERMAN
ITALIAN
SWEDISH
L
LANGUAGE
DISC MENU
ENGLISH
FRENCH
SPANISH
GERMAN
ITALIAN
SWEDISH
DUTCH
L
LANGUAGE
OSD
ENGLISH
FRANÇAIS
ESPAÑOL
DISPLAY
TV ASPECT
4:3 LETTER BOX
4:3 PAN & SCAN
16:9 WIDE
DISPLAY
PANEL DISPLAY
BRIGHT
DIMMER
AUTO
DISPLAY
TV ASPECT 4:3 LETTER BOX
PANEL DISPLAY BRIGHT
ANGLE ICON ON
AUTO POWER OFF ON
DISPLAY
TV ASPECT 4:3 LETTER BOX
PANEL DISPLAY BRIGHT
ANGLE ICON ON
AUTO POWER OFF ON
In Setup menu, QUICK mode and CUSTOM mode are availale. QUICK mode consists of the set-
ting menus often needed, and you can make all settings required in CUSTOM mode.
You can make the settings of the items with
mark in QUICK mode. QUICK