Denon DVM-2815 - Manual (Page 24)

– 24 – EN
Use markers to memorise your favourite places on a disc.
Press the SEARCH MODE but-
ton four times (CD, VCD: three
times) during playback.
• The display screen and Markers will
appear on the TV screen.
Press the s or B button to
select 1, 2, 3, 4, 5, 6, 7, 8, 9, or 10 and ensure that “-
: - - : - -” appears in the display.
When reaches the desired point, press the ENTER
button.
• The Title or Track and elapsed playing time will appear
in the TV screen.
To return to the Marker later, press the SEARCH
MODE button four times (CD, VCD: three times) dur-
ing playback and the s or B button to choose the
desired marker, then press the ENTER button. 4
3
2
1
VCD CD DVD-V DVD-A
Marker Setup Screen
-- --:--:--
1 2 3 4 5 6 7 8 9 10 AC
DVD
Adjust the Black Level Settings to make
the black parts of the picture as bright as you preferred.
Press the MODE button during playback.
Press the ENTER button to switch
ON/OFF.
ON (Default) : Makes the dark
parts brighter.
OFF : Shows the original picture
as recorded.
Press the MODE or RETURN button to exit. 3
2
1
VCD DVD-V DVD-A
Black Level Setting
ON
You can enjoy stereophonic visual space on your existing 2
channel stereo system.
Press the MODE button twice
during playback.
Press the ENTER button to set
it 1(Natural effect), 2(Emphasized effect) or OFF.
Press the RETURN button to exit.
Press the MODE button during playback.
Press the ENTER button to set 1(Natural effect),
2(Emphasized effect) or OFF.
Press the RETURN button to exit.
NOTES :
• Select Virtual Surround OFF or adjust the volume down
if the sound is distorted.
• When MULTI CHANNEL is selected as the audio chan-
nel in the audio setting of the setup menu, Virtual
Surround does not function. Details are on page 26.
3
2
1
WMA MP3 CD
3
2
1
VCD DVD-V DVD-A
Virtual Surround
OFF
PLAYING A DISC
Press the DISPLAY button during playback, the cur-
rent Track will be displayed on the TV screen.
• The elapsed and remaining playing time of the current
track will be displayed.
Press the DISPLAY button again to show current Total
Track.
• The elapsed and remaining playing time of the disc will be
displayed.
Press the DISPLAY button the third time to remove the
display.
Press the DISPLAY button during playback, the cur-
rent Track will be displayed on the TV screen.
• The file name of the current track will be displayed.
Press the DISPLAY button again to show current Total
Track.
• The elapsed playing time of the current disc will be dis-
played.
Press the DISPLAY button the third time to remove the
display.
You can check information about the current disc by pressing the
DISPLAY button on the remote control.
Press the DISPLAY button during
playback to show current Track.
• The elapsed and remaining playing
time of the current track will be dis-
played.
Press the DISPLAY button again
to show current Group.
• The elapsed and remaining playing
time of the current group will be
displayed.
Press the DISPLAY button the third time.
• The BIT RATE and the current repeat setting will be dis-
played.
• If you are playing a dual layered disc, the layer number will
also be displayed (L0: Layer 0 is playing. L1: Layer 1 is
playing).
Press the DISPLAY button the fourth time to remove the
display.
4
3
2
1
DVD-A
3
2
1
WMA JPEG MP3
3
2
1
VCD CD
IIII T
NOTES:
• Opening the disc tray or turning off the power or select
AC at step and press the ENTER button will erase
all Markers.
• To clear a marker, using the s or B button, position
the cursor on to the marker number to be cleared and
press the CLEAR button.
• You can mark up to 10 points.
Press the SEARCH MODE or RETURN button to
exit. 5
2