JLCooper MCS3 USB - Manual (Page 35)

35
MCS 3 Editor Application's Menus
File Menu
New Keyset...
Creates a New Keyset, and links it with a particular Target
Application.
In other words, when you are ready to start defining the
function of the MCS
3
, the first thing you do is select New
Keyset.
You will see a standard dialogue. Then select the application
that you wish to control with the MCS
3
. We refer to that
application as the "target" application, simply to distinguish it
from the MCS
3
application.
Then you use the MCS
3
application to assign what each control
will send. These assignments are collectively called a Keyset.
Import Keyset...
Imports a previously exported Keyset file.
Places the Keyset into the Keysets menu, and
saves the Keyset within the MCS
3
application's Preference file.
Export Keyset...
Exports a Keyset as an independent file, to allow you to more
easily transfer the file to another computer.
Quit
Exits the MCS
3
Application. Once you have defined your
Keysets, the MCS
3
Application does not need to be running for
the MCS
3
hardware to operate.