JLCooper MCS3 USB - Manual (Page 15)

15
The MCS
3
Editor
Application
The MCS
3
application features a picture of the MCS
3
.
In the upper left is the name of the current Keyset.
To the right is the “Control Info Box”, which displays what
each MCS
3
control will do within a specific application.
To edit (change) what the MCS
3
sends, first select the control
by pressing the desired key or rotating the wheel.
(Or, use the mouse to click on the picture of the control).
The control's name and function are displayed in the Control
Info Box, where they can be edited.
When "Stop" is pressed on the MCS 3 , it will emulate the PC's "Return" key.
The "Stop" key is selected