JLCooper MCS3 USB - Manual (Page 22)

22
Hide Pointer
When the click occurs, you will see the pointer momentarily
move to the location where the click occurs. Then the pointer
quickly returns to its original location.
If you do not want to see the pointer move, check “Hide
Pointer" from the Keysets menu.
Then the mouse click will occur “invisibly”. This is a very nice
effect because it makes it appear the MCS
3
was designed as a
hardware control surface especially for your application.
If a click does not do what you expected, uncheck Hide
Pointer so you can observe where the click is actually
occurring.
For each Keyset, you can choose to check or not to check Hide
Pointer in the Keysets menu.