JLCooper ES-450SPE - Manual (Page 29)

29
Routing responses from the eBOX Serial Ports
Pressing EJECT + GOTO with a numbered button allows you to
enable or disable the reception of responses such as timecode and
status from specific serial ports on the eBOX to the ES-450. This
is also known as Tally.
• EJECT + GOTO + 1 (REC/SHIFT)
Enables or disables the reception of responses from Port 1 on
the eBOX. This is indicated by the LED above the 1 button.
• EJECT + GOTO + 2 (ASM)
Enables or disables the reception of responses from Port 2 on
the eBOX. This is indicated by the LED above the 2 button.
• EJECT + GOTO + 3 (INS)
Enables or disables the reception of responses from Port 3 on
the eBOX. This is indicated by the LED above the 3 button.
• EJECT + GOTO + 4 (V)
Enables or disables the reception of responses from Port 4 on
the eBOX. This is indicated by the LED above the 4 button.
Note: Only one serial port on the eBOX can be selected for the
reception of responses or Tally.