JLCooper ES-450SPE - Manual (Page 28)

28
Using eBOX Mode
As previously mentioned, the ES-450 can control up to 4 devices.
These devices can be selected by using the EJECT and GOTO
buttons.
Routing commands to the eBOX Serial Ports
Pressing EJECT with a numbered button allows you to enable or
disable the transmission of commands from the ES-450 to specific
serial ports on the eBOX.
• EJECT + 1 (REC/SHIFT)
Enables or disables the transmission of commands to Port 1 on
the eBOX. This is indicated by the LED above the 1 button.
• EJECT + 2 (ASM)
Enables or disables the transmission of commands to Port 2 on
the eBOX. This is indicated by the LED above the 2 button.
• EJECT + 3 (INS)
Enables or disables the transmission of commands to Port 3 on
the eBOX. This is indicated by the LED above the 3 button.
• EJECT + 4 (V)
Enables or disables the transmission of commands to Port 4 on
the eBOX. This is indicated by the LED above the 4 button.