JLCooper ES-450SPE - Manual (Page 27)

27
Using the ES-450 with the eBOX
Because the ES-450SPE has more functions compared to the
normal ES-450, the EJECT button is now used modifier button.
That is, pressing it allows the operator to modify the operational
characteristics of the ES-450SPE.
Configuring the mode of operation
The ES-450SPE has three modes of operation.
• Host Mode
In Host Mode, the unit acts as a computer peripheral and
communicates using the Host Mode protocol. This is selected
by removing the jumper internal to the unit.
• EBOX Mode
In eBOX Mode, the unit communicates with the eBOX using
the eBOX protocol. The internal jumper must be installed to
access this mode. This mode can be selected by pressing
EJECT + STOP until the display shows eBOX Mode.
• Doremi Mode
In Doremi Mode, the unit communicates with a Doremi video
server using the Doremi protocol. The internal jumper must be
installed to access this mode. This mode can be selected by
pressing EJECT + STOP until the display shows Doremi
Mode.
Note: Doremi Mode is not fully implemented at this time.