Jetway Computer NC62K - Manual (Page 31)

27
This will show the CPU/FAN/System voltage chart and FAN Speed.
SFAN Smart Mode:
There are three choose , Disabled, Formula 1, Formula 2.
Disabled: Fan setting full speed.
Formula 1: Fan working low speed, under temperature 2.
Formula 2: Fan stop when under temperature 2.
3-7 Power User Overclock Setting
Phoenix – AwardBIOS CMOS Setup Utility
Power User Overclock Setting
Item Help Profile Load Press Enter
Profile Save Press Enter
ess Enter Hyper Transport Settings Pr
Current Host Frequency is 200MHZ
0 CPU Clock at next boot is 20
Current DRAM Frequency is DDR533
DRAM Clock at Next Boot is Auto
1.350v) CPU Voltage Default(
CPU Vcore x-shift Default
LDT Voltage 1.20v(default)
NB Voltage 1.10v(default)
default) VDIMM Voltage 1.84v(
CPU Voltage 1.36v
NB Voltage 1.11v
VDIMM Voltage 1.84v
Menu Level >
↑↓→← Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F6:Optimized Defaults F7:Standard Defaults