Jetway Computer NC62K - Manual (Page 16)

2-5 Connectors and Headers
2-5-1 Connectors
(1) 12V Power Connector (4-pin block):12V CN
This is a newly defined 4-pins connector support extra 12V voltage to maintain system
power consumption in the case that an AD-Scalar daughter board is used. Without this
connector might cause system unstable because the power supply can not provide
sufficient current for system.
Pin
1
12V CN
(2) USB Port connector: UL3,UL4
The connectors are 4-pins connector that connect USB devices to the system board,
and standard RJ45 connector for Network supports 10/100/1000 BASE-T transfer rate.
(3)LAN Port connector: UL3,UL4(optional)
This connector is standard RJ45 over USB connectors for Network devices connection.
LAN1supports 10M/100Mb/s data transfer rate.
(4) VGA Connector (15-pin female): VGA
VGA Connector is a 15-pin D-Subminiature Receptacle connector.
This connector is for connection Monitor and System to display.
12