Jetway Computer NC62K - Manual (Page 14)

Generally, installing DDRII memory to your motherboard is very easy; you can refer to
figure 2-4 to see what a 240-Pin DDR 800II / DDRII 667 DDR SDRAM module looks like.
10
NOTE! When you install DIMM module fully into the DIMM socket the eject tab should be
locked into the DIMM module very firmly and fit into its indention on both sides.
WARNING! For the DDR SDRAM CLOCK is set at 166MHz, use only DDR333-compliant DDR
Modules. When this motherboard operate at 133MHz, most system will not even
boot if non-compliant modules are used because of the strict timing issues, if your
SDR Modules are not DDR333-compliant, set the DDR SDRAM clock to 133MHz
to ensure system stability.
DI
MM
1 (
BAN
K0+
BAN
K1
)
DIMM0 & DIMM1
DIMM0 & DIMM1