Jetway Computer NC62K - Manual (Page 30)

26
Phoenix – AwardBIOS CMOS Setup Utility
PC Health Status
Item Help
Show PC Health in Post Enabled
Smart FAN Configuration Press Enter
Vcore 1.36V
VDIM 1.84V
NB 1.12V
+5V 5.04V
+12V 11.96V
+5VSB 5.04V
VBAT 3.17V
CPU Temperature 37
°C/98F
SYS Temperature 40
°C/104F
CPUFAN Speed 0 RPM
SYS FAN1 Speed 0 RPM
SYS FAN2 Speed 1514 RPM
Menu Level >
↑↓→← Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F6:Optimized Defaults F7:Standard Defaults
Show PC Health in Post
During Enabled, it displays information list below. The choice is either Enabled or Disabled
CPU Smart FAN Configurations
CPU Full-Speed Temp
This item allows you setting the FAN works in full speed when the temperature over the value
which out set. If the temperature below the value but over the Idle Temperature, the FAN
will works over 60% of full speed, and the higher temperature will gain higher FAN speed,
after over the temperature which this item setting, the FAN works in full speed.
CPU Idle Temp
This item allows you setting the FAN works in 60% of full speed, when the temperature
lower than the temperature which you setting.
Current CPU Temperature/Current System Temp/Current FAN1, FAN2 Speed/Vcore/
Vdd/3.3V/+5V/+12V/-12V/VBAT(V)/5VSB(V)