Jetway Computer NU93 - Manual (Page 36)

31
*When set as [Auto], it will only install Legacy OpROM with Legacy OS and logo
will not be shown during POST. EFI driver will still be installed with EFI OS.
USB Support
The optional settings are: [Disabled]; [Full Initial]; [Partial Initial].
[Disabled]: All USB devices will NOT be available until after OS boot;
[Partial Initial]: USB mass storage and specific USB port/device will NOT be
available before OS boot;
[Full Initial]: All USB devices will NOT be available in OS and POST.
PS2 Device Support
The optional settings are: [Disabled]; [Enabled].
The PS2 devices will be skipped if this is set as [Disabled].
Network Stack Driver Support
The optional settings are: [Disabled]; [Enabled].
Network Stack Driver will be skipped if this is set as [Disabled].
Boot Option Priorities
Boot Option # 1/#2…
Use this item to set system boot order.
The optional settings are: [UEFI: Built-in EFI Shell]; [Disabled].
Hard Drive BBS Priorities
Press [Enter] to set hard driver BBS boot order.