Jetway Computer NU93 User Manual

Page 30

The optional settings are: [IDE Mode]; [AHCI Mode].
MSATA1
The optional settings are: [Enabled]; [Disabled].
MSATA1 HotPlug
The optional settings are: [Enabled]; [Disabled].
Use this item to enable or disable support for MSATA HotPlug function.
SATA1
The optional settings are: [Enabled]; [Disabled].
SATA1 HotPlug
The optional settings are: [Enabled]; [Disabled].
Use this item to enable or disable support for SATA1 HotPlug function.

 CSM Configuration

Press [Enter] to make settings for the following sub-items:
Compatibly Support Module Configuration
Option ROM Message
Use this item to set display mode for option ROM.
The optional settings are: [Force BIOS]; [Keep Current].
INT19 Trap Response
This item is for BIOS reaction on INT19 trapping by Option ROM.
The optional settings are: [Immediate]; [Postponed].
[Immediate]: To execute the trap right away;
[Postponed]: To execute the trap during legacy boot.
Option ROM execution order
Storage
This item controls the execution of UEFI and Legacy Storage OpROM.
The optional settings are: [Do not launch]; [UEFI only]; [Legacy only]; [Legacy first];
[UEFI first].
Video
This item controls the execution of UEFI and Legacy Video OpROM.
The optional settings are: [Do not launch]; [UEFI only]; [Legacy only]; [Legacy first];
[UEFI first].