Jetway Computer NU93 User Manual

Page 33

Spread Spectrum Clock
The optional settings are: [Enabled]; [Disabled].
RC6(Render Standby)
Use this item to enable or disable render standby support.
Primary IGFX Boot Display
Use this item to select the video device which will be activated during POST. This
has no effect if external graphics present.
The optional settings are: [VBIOS Default]; [HDMI1]; [HDMI2].

 South Bridge

Press [Enter] to make settings for the following sub-items:
Mini PCIE
Use this item to enable or disable Mini-PCIE.
The optional settings are: [Disabled]; [Enabled].
When set as [Enabled], user can make settings in ‘Speed’ that appears:

Speed
Use this item to select PCIE speed for Mini-PCIE slot.
The optional settings are: [Auto]; [Gen2]; [Gen1].

Onboard PCIE Lan1 Device
Use this item to control the Onboard PCIE Lan1 device.
The optional settings are: [Disabled]; [Enabled].
Onboard PCIE Lan2 Device
Use this item to control the Onboard PCIE Lan2 device.
The optional settings are: [Disabled]; [Enabled].
Onboard Lan BootROM
Use this item to enable or disable boot option ROM for onboard network devices.

XHCI Mode
The system will show whether current XHCI support is enabled or disabled.
USB 2.0 (EHCI) Support
The system will show whether current USB 2.0 (EHCI) support is enabled or
disabled.