Jetway Computer NU93 User Manual

Page 29

CPU C7 report
The optional settings: [Disabled]; [Enabled].
Use this item to enable or disable CPU C7 (ACPI C3) report to OS.
Package C State Limit
The optional items are: [C0]; [C1]; [C3]; [C6]; [C7]; [No Limit].

 PPM Configuration

Press [Enter] to make settings for PPM Configuration:
PPM Configuration:
EIST
The optional settings: [Enabled]; [Disabled].
Use this item to enable or disable Intel SpeedStep.
CPU C Status Report
The optional settings: [Disabled]; [Enabled].
Use this item to enable or disable CPU C status report to OS.
*When set as [Enabled], the following sub-items shall appear:
Max CPU C-state
This option controls Max C state that the processor will support.
The optional settings: [C7]; [C6]; [C1].

 SATA Configuration

Press [Enter] to make settings for the following sub-items:
SATA Configuration
SATA Port
The optional settings: [Disabled]; [Enabled].
Use this item to enable or disable Serial ATA port.
SATA Speed Support
The item is for user to set the maximum speed the SATA controller can support.
The optional settings are: [Gen1]; [Gen2].
SATA ODD Port
The optional settings are: [Port0 ODD]; [Port1 ODD]; [No ODD].
SATA Mode