Jetway Computer NF9I - Manual (Page 42)

37
The optional settings are: [On]; [Off].
Quiet Boot
Use this item to enable or disable Quiet Boot option.
The optional settings are: [Enabled]; [Disabled].
GateA20 Active
UPON REQUEST - GA20 can be disabled using BIOS services.
ALWAYS – do not allow disabling GA20; this option is useful when any RT code is
executed above 1MB.
The optional settings are: [Upon Request]; [Always].
Option ROM Messages
Use this item to set display mode for option ROM.
The optional settings are: [Force BIOS]; [Keep Current].
INT19 Trap Response
BIOS reaction on INT19 trapping by Option ROM; IMMEDIATE – execute the trap
right away; POSTPONED – execute the trap during legacy boot.
The optional settings are: [Immediate]; [Postponed].
CSM Support
Use this item to enable or disable CSM support. If Auto is selected, based on OS,
CSM will be enabled or disabled automatically.
The optional settings are: [Disabled]; [Enabled]; [Auto].
Boot Option Priorities
Boot Option #1
Use this item to set the system boot order.