Jetway Computer NF9I - Manual (Page 38)

33
WatchDog Timer Control
Use this item to enable or disable WatchDog Timer Control. When set as
[Enabled], the following sub-items shall appear:
WatchDog Timer Val
User can set a value in the range of 4 to 255.
WatchDog Timer Unit
The optional settings are: [Second];[Minute].
► Shutdown Temperature Configuration
Use this item to select system shutdown temperature.
The optional settings are: [Disabled]; [60 C/140 F]; [65 C/149 F]; [70 C/158 F]; [75
C/167 F].
► SmartFan Configuration
CPU / SYSFAN1 / SYSFAN2 3/4 Pin Fan Select
Use this item to select 3/4 pin Fan.
The optional settings are: [3 Pin]; [4 Pin].
CPUFAN / SYSFAN1 / SYSFAN2 SmartFan Mode
When set as [Enabled], the following sub-items shall appear:
CPUFAN / SYSFAN1 / SYSFAN2 Full Speed Temp
Use this item to set a degree for CPU / SYSFAN1/ SYSFAN2 to run at full speed
when above the specific temperature set.
CPUFAN / SYSFAN1 / SYSFAN2 Idle Temp
Use this item to set a degree for CPU / SYSFAN1/ SYSFAN2. FAN will idle speed
when below this temperature.
CPUFAN / SYSFAN1 / SYSFAN2 Idle Duty
Use this item to set idle duty when below idle temperature.