Jetway Computer NF9I - Manual (Page 35)

30
Technology).
Execute Disable Bit
The optional settings are: [Disabled]; [Enabled].
Limit CPUID Maximum
The optional settings are: [Disabled]; [Enabled].
This item should be set as [Disabled] for Windows XP.
► SATA Configuration
SATA Mode
The optional settings are: [Disable]; [IDE Mode]; [AHCI Mode]; [RAID Mode].
When set as [IDE Mode], user can set value for the following sub-item:
Serial-ATA Controller 0
This item is compatible mode for legacy OS booting support.
The optional settings are: [Disable]; [Enhanced]; [Compatible].
Serial-ATA Controller 1
The optional settings are: [Disable]; [Enhanced].
► USB Configuration
Legacy USB Support
The optional settings are: [Auto]; [Disabled]; [Enabled].
EHCI Hand-off
The optional settings are: [Disabled]; [Enabled].
USB hardware delays and time-outs:
USB Transfer time-out
Use this item to set the time-out value for control, bulk, and interrupt transfers.
The optional settings are: [1 sec]; [5 sec]; [10 sec]; [20 sec].
Device reset time-out