Jetway Computer NF9I - Manual (Page 40)

35
[LVDS+HDMI]; [CRT+LVDS].
When set as [LVDS], [LVDS+HDMI] and [CRT+LVDS], user can set value for the
following sub-item:
Active LFP
Use this item to select the Active LFP configuration.
The optional settings are: [Disabled LVDS]; [Enabled LVDS].
► South Bridge
Press [Enter], user can have a view of SB Chipset Configuration.
All USB Devices
Use this item to enable or disable All USB devices.
The optional settings are: [Enabled]; [Disabled].
Onboard Lan Devices
Use this item to enable or disable device in the chipset.
The optional settings are: [Enabled]; [Disabled].
Azalia HD Audio
Use this item to enable or disable Azalia HD Audio.
The optional settings are: [Enabled]; [Disabled].
Restore AC Power Loss
Use this item to specify what state to go to when power is re-applied after a power
failure (G3 State).
The optional settings are: [Power Off]; [Power On]; [Last State].
SLP_S4# Assertion Stretch
The optional settings are: [Disable]; [Enable].
SLP_S4# Minimum Assertion Width
Use this item to select a minimum assertion width of the SLP_S4# signal to ensure
that the DRAMs has been safely power-cycled.