Jetway Computer NF9I - Manual (Page 37)

32
Serial Port
Use this item to enable or disable serial port (COM).
Change Settings
Use this item to select an optimal setting for super IO device.
► Parallel Port Configuration
Press [Enter] to make settings for the following items:
Parallel Port
Use this item to enable or disable parallel port (LPT/ LPTE).
Change Settings
Use this item to select an optimal setting for super IO device.
Device Mode
Use this item to change the printer port mode.
The optional settings are: [Standard and Bi-direction (SPP) mode]; [ECP Mode];
[ECP and EPP 1.9 mode]; [Printer mode].
PS2 KB/MS Connect
Use this item to set PS2 connect primary device.
The optional settings are: [Keyboard First]; [Mouse First].
CIR Controller
Use this item to enable or disable CIR controller.
The optional settings are: [Enabled]; [Disabled].
Case Open Detect
Use this item to detect if the case has been opened or not.
The optional settings are: [Enabled]; [Disabled].
► PC Health Status
Press [Enter] to view hardware health status.
► Watchdog Configuration