Jetway Computer NC9FL User Manual
Page 35
30
by the internal graphics device.
The optional settings are: [32M]; [64M]; [96M]; [128M]; [160M]; [192M]; [224M];
[256M]; [288M]; [320M]; [352M]; [384M]; [416M]; [448M]; [480M]; [512M]; [1024M].
DVMT Total Gfx Mem
Use this item to select DVMT 5.0 total graphics memory size used by the internal
graphics device.
The optional settings are: [128MB]; [256MB]; [MAX].
Primary IGFX Boot Display
Use this item to select the video device which will be activated during POST. This
has no effect if external graphics present. Secondary boot display selection will
appear based on your selection. VGA modes will be supported only on primary
display.
The optional settings are: [VBIOS Default]; [DVI]; [HDMI], and [LVDS].
*This optional setting [LVDS] can only appear when ‘Active LFP’ is set as [LVDS].
Secondary IGFX Boot Display
The optional settings are: [Disabled]; [DVI]; [HDMI], and [LVDS].
*This optional setting [LVDS] can only appear when ‘Active LFP’ is set as [LVDS].
DVI to CRT Dongle Support
The optional settings are: [Disabled]; [Enabled].
Active LFP
The optional settings are: [No LVDS]; [LVDS].
LVDS Panel Type:
Use this item to manually select LVDS panel type.
The optional setting are: [640 x 480 18-bit]; [800x 600 18-bit]; [1024 x 600 18-bit];
[1024 x 768 24-bit]; [1280 x 720 18-bit]; [800 x 480 18-bit]; [1366 x 768 18-bit];
[1440 x 900 18-bit]; [1366 x 768 24-bit]; [1440 x 900 24-bit]; [1280 x 1024
24-bit];[1440 x 1050 24-bit]; [1600 x 900 24-bit]; [1680 x 1050 24-bit]; [1600 x 1200