Jetway Computer NC9FL User Manual
Page 34

29
The optional settings are: [Enabled]; [Disabled].
Azalia
The optional settings are: [Enabled]; [Disabled].
-Azalia Internal HDMI Codec
Use this item to enable or disable internal HDMI codec for Azalia.
System State after Power Loss
The optional settings are: [Always Off]; [Always On]; [Former State].
*This optional settings: [Always On] and [Former State] can only appear when
‘ERP Support’ is set as [Disabled].
USB Configuration
Press [Enter] to further setting USB port configuration.
EHCI1/EHCI2
The optional settings are: [Disabled]; [Enabled].
Use this item to control USB EHCI (USB 2.0) functions. One EHCI controller must
always be enabled.
System Agent (SA) Configuration
Graphics Configuration
Press [Enter] to further setting graphics configuration.
Primary Display
The optional settings are: [Auto]; [IGFX]; [PEG].
GTT Size
The optional settings are: [1MB]; [2MB].
Aperture Size
The optional settings are: [128MB]; [256MB]; [512MB].
DVMT Pre-Allocated
Use this item to select DVMT 5.0 pre-allocated (fixed) graphics memory size used