Jetway Computer NC9FL - Manual (Page 31)

26
The optional settings are: [Disabled]; [Enabled].
Use this item to enable or disable ERP function for this board. This item should be
set as [Disabled] if you wish to have active all Wake-up functions.
WatchDog Timer
Use this item to enable or disable WatchDog Timer control. When set as [Enabled],
the following sub-items shall appear:
WatchDog Timer Value
User can set a value in the range of 1 to 255.
WatchDog Timer Unit
The optional settings are: [Sec.];[Min.].
 PC Health Status
Press [Enter] to view hardware health status, set SMARTFAN configuration and
select system shutdown temperature.
 SmartFan Configuration
Press [Enter] to make settings for SmartFan Configuration:
SmartFAN Configuration
CPUFAN / SYSFAN Smart Mode
The optional settings are: [Disabled]; [Enabled].
When set as [Enabled], the following sub-items shall appear:
CPUFAN / SYSFAN Full-Speed Temperature
Use this item to set CPUFAN/SYSFAN full speed temperature. Fan will run at full
speed when above this temperature.
CPUFAN / SYSFAN Full-Speed Duty
Use this item to set CPUFAN/SYSFAN full speed duty. Fan will run at full speed
when above the pre-set duty.
CPUFAN / SYSFAN Idle-Speed Temperature