Doro 5055 - Manual (Page 4)

English
4 www.doro.com
Installation
Unpacking
The package should include the following items:
- Handset - Mains adapter
- Base unit - Line cord
- 2 batteries - User Manual – Guarantee card (AU & NZ only)
Models 5055+1/5065R+1 are also supplied with an extra handset including batteries,
charger and electrical mains adapter.
Connection
1. Connect the mains adapter to the
Y
socket of the base unit and to
an electrical wall socket.
2. Remove the battery cover from the back of the handset. Insert the
batteries into the handset ensuring correct battery polarity is observed.
Replace the battery cover.
3. Place the handset in the base unit, with the keypad facing outwards.
Once the handset is correctly placed in the base unit, a beep will be
heard and the battery charge indicator
Once the handset is correctly placed in the base unit, a beep will be
in the display will begin to fl ash.
4. Charge the handset batteries without interruption for 24 hours initially
(thereafter fully discharged handset batteries will take up to 14 hours
to recharge).
5. ONCE CHARGED, connect the telephone line cord to the socket
marked
T
on the underside of the base unit and then to a telephone
T T
network wall socket.
6. A click will be heard when the modular plug is correctly connected.
7. To setup the answering machine (5065R) please refer to pages 26-32.