Doro 5055 - Manual (Page 20)

English
20 www.doro.com 20 20
Settings
Tone/Pulse Dialling (UK only)
Select dialling type (tone or pulse). The default setting is tone dialling,
dependant on your network system requirements this may not require
changing.
This setting only applies to models purchased in the UK.
1. Press
w
(
R
).
2. Scroll using
8 8
/
9 9
until
w
fl ashes in the display. Press
0 0 0
3. Press
0
repeatedly until the display shows 2/5.
0 0
4. Scroll using
8 8
/
9 9
to the desired setting (TONE/PULSE). Press
0
to confi rm setting and move to the next programming sequence,
0 0
alternatively.
5. Press
w
(
R
) to exit the Menu system.
Line Adaptation
On some telephone networks and PBX systems, it may be necessary to
adjust the microphone level.
If the telephone has been purchased in Australia this setting will be
displayed as 2/4.
1. Press
w
(
R
).
2. Scroll using
8 8
/
9 9
until
w
fl ashes in the display. Press
0 0 0
3. Press
0
repeatedly until the display shows 3/5. - UK (2/4 - Australia).
0 0
4. Scroll using
8 8
/
9 9
to the desired setting (A/B=normal, C=medium,
D=low).
5. Press
0
to confi rm setting and move to the next programming
0 0
sequence, alternatively.
6. Press
w
(
R
) to exit the Menu system.