Ivoclar Vivadent SR Ivocap Equipment System - Manual (Page 7)

3.2 Hazardous areas and
safety equipment
Description of the risk areas of the
SR Ivocap System:
See also Chapter 2.
7
3.1 Components
The SR Ivocap basic assortment consists
of the following components:
• Pressure apparatus
• Flask
• Clamping frame
• Capsule plunger
• Investment aid
• Funnel
• Compression spring
• Allen key
Furthermore, the following accessories
are required (not contained in the
assortment):
• Cap Vibrator (Ivoclar Vivadent)
• Polymerization bath
(various manufacturers)
• Hydraulic press
(various manufacturers)
• Plastic floaters (Ivoclar Vivadent)
3. Product Description
3.3 Functional description
The SR Ivocap System is an injection
technique which has been especially
developed to compensate curing
shrinkage. Controlled polymerization
allows shrinkage of the material during
polymerization to be compensated by
inflowing material. The SR Ivocap
injection technique, therefore, permits
the fabrication of high quality products
with outstanding physical properties.
3.4 Accessories
• Cap Vibrator (Ivoclar Vivadent)
• Wall bracket for 4 pressure apparatus
(e.g. from BDT)
• Polymerization bath (e.g. from BDT)
• Hydraulic press
(various manufacturers)
• Various accessories (BDT)
Address of BDT:
BDT GmbH, Industriestrasse 27,
D-77656 Offenburg
(Germany)
There is a burn hazard if no protective
clothing and gloves are worn.
There is a burn hazard if the equipment
is removed from the boiling water
without protective gloves.
Type of risk Hazardous area
Flask and clamping frame
Splash water from the
polymerization bath