Ivoclar Vivadent Lumamat 100 - Manual (Page 19)

19
9. Product Specifications
Lumamat 100
This chapter contains all the
relevant product specification.
9.1 Delivery form
1 Lumamat 100
1 Power cord
1 Extra fuse
1 Extra lamp
1 Screw driver
1 Operating Instructions
1 Warranty card
1 Standard accessories set
1 Test set
Colours:
Standard colour:
White
RAL 9016
Special colours:
Salmon
RAL 3014
Aquamarine RAL 5014
Turquoise RAL 6027
9.2 Technical data
Power supply
Single-phase alternating current:
220–230 V / 50–60 Hz
100 V / 50–60 Hz
110 V / 50–60 Hz
120 V / 50–60 Hz
Tolerated voltage fluctuations:
+/– 10 %
Power consumption:
max. 750 W
Type of lamp:
Fluorescent lamps (only use
Ivoclar Vivadent lamps)
Electrical fuses:
Value for all voltage versions:
For 220–230 V:
T 5A
Has to comply with IEC 127
For 100–120 V:
T 8A
Has to be UL and CSA listed.
Dimensions of fuses:
Diameter 5 x 20 mm
Dimensions:
Width:
323 mm
Depth: 440 mm
Height:
closed
272 mm
open 540 mm
Lightwave range:
400–580 nm
Weight:
13.4 Kg
Safety information
This apparatus has been
constructed according to the
following directives:
– Directive 73/336/EEC, low-
voltage guidelines
– Directive 89/336/EEC, radio
protection /electromagnetic
compatibility
Furthermore, the following
standards were observed:
– IEC 61010-1
– UL 3101-1
– CSA 1010.1
9.3 Acceptable operating
conditions
Acceptable temperature range
5–40 °C / 41–104 °F
Acceptable humidity range
Maximum relative humidity at
31 °C (87 °F), gradually
decreasing to 50 % at 35 °C
(95 °F), condensation excluded.
Acceptable ambient pressure
The unit has been tested for use
at altitudes of up to 2000 m
above sea level.
9.4 Acceptable
transportation and
storage conditions
Acceptable temperature range
-30 – +80 °C (-22 – +176 °F)
Acceptable humidity range
Maximum relative humidity at
31 °C (87 °F) gradually decrea-
sing to 50 % at 40 °C (104 °F),
condensation excluded.
Acceptable ambient pressure
500-1060 mbar.
Use only original packaging with
the respective foam material for
shipping purposes.