Starting intellinav – Intellinav 2 User Manual
Page 8
6
In
te
lli
n
a
v
2
U
se
r’s
M
a
n
u
a
l
Press the Standby button. If the Battery On/Off switch
on the bottom of the unit is in the Off position, set it to
On first.
The Intellinav screen appears.
Tap N
Na
avviig
ga
attiio
on
n. A warning screen appears.
Tap II A
Ag
grre
ee
e after you have read and agreed to the
warning. The map view appears and you are ready to set
your first destination!
Getting GPS Signal
To use the Intellinav system to guide you to a destination,
the system's GPS antenna must receive GPS signals. GPS
signals can be obstructed by ceilings, trees, and nearby
tall buildings. Signals can also be obstructed by the roof
of your vehicle. For best results, position your Intellinav
system where it has a clear view of the sky.
The very first time turning on the system may take as
long as 15 minutes to obtain a valid GPS fix. Once the
first GPS fix is obtained, thereafter, it should normally
take no more than 30 seconds to 1 minute to obtain a
valid GPS fix.
Car Cursor
The status of the GPS signal is represented in the car
cursor color:
Green: 4 or more satellites
Yellow: 3 satellites
Red: less than 3 satellites
Gray: no satellite at all
Only when the car cursor is green will you be receive
accurate GPS tracking and navigation.
GPS Information
T
To
o vviie
ew
w tth
he
e G
GP
PS
S iin
nffo
orrm
ma
attiio
on
n::
1. Tap M
Me
en
nu
u. The Main
Menu appears.
2. Tap G
GP
PS
S IIn
nffo
orrm
ma
attiio
on
n.
The GPS Information screen appears.
Starting Intellinav