Daewoo DLT-20J3T - Manual (Page 22)

16
PR 19 – – – – –
Mono
Full Screen
To Watch TV
- If the AV1 terminal on the TV set is connected with an external device, which is switched on, the TV will come ON
in AV1 mode. Otherwise, TV will come ON in the last mode used.
1. Turning on the TV.
a) If the stand-by indicator is red, then the TV set
is in stand-by mode. You can switch on using
the remote control “POWER” button (press and
hold 0,5 second), the NUMBER 0…9 buttons,
or PR UP/DOWN buttons. The local PR UP/
DOWN buttons on the TV can also be used.
Once on, the stand-by indicator turns to green
and the picture appears on the screen.
b) If the stand-by indicator is not lit, then the TV
set is powered off. You must switch ON the TV
set local MAIN POWER switch on the set. If a
picture does not appear, then the stand-by
indicator will be red. In this case, use the re-
mote control as indicated in a).
c) If the stand-by indicator is flashing red, and
green then the TV set is in child lock mode. It is
necessary to use the remote control POWER
button, NUMBER 0…9 buttons, or PR UP/
DOWN buttons. The local PR UP/DOWN but-
tons on the TV will not function. Once on, the
stand-by indicator turns to green and the pic-
ture appears on the screen.
2. Adjust program.
• Select the desired program by pressing the
“
PR ” button or the number button.
3. Adjust volume.
• Sound reduces by pressing the “VOL
” but-
ton.
• Sound increases by pressing the “ VOL” but-
ton.
Note : Sound mutes by pressing the “MUTE” ( )
button.
4. Turning off the TV.
• Pressing the remote control “POWER” button
and hold 0,5 second, will switch off the TVto
stand-by mode (low power consumption mode)
which also allows quick restart by remote con-
trol (see above: Turning on the TV).
• Pressing the TV set local MAIN POWER button,
you can power off the TV set. In this case, you