Infloor Copper Manifold Guide - Manual (Page 2)

I
NTRODUCTION
Infloor offers a complete line up of copper manifolds for loop distribution in radiant systems. Copper manifolds
offer excellent value while maintain the ability to adjust flow through individual loops. This document covers
Infloor’s copper manifold product offering and installation tips on the product.
P
RODUCTS
– 1” M
ANIFOLDS
14 D
ROP
B
LANK
M
ANIFOLD
(28140)
Blank manifolds come with 1” copper main pipe and ½” drops for whatever fitting is required for the particular
job. The basic spacing and dimensions are the same for all other 1” Infloor manifolds.
14 D
ROP
M
ANIFOLD WITH
B
ALL
V
ALVES AND
PEX C
ONNECTION
(28151 – 3 /
8
” PEX, 28150 - ½” PEX)
Designed for use as the supply manifold, these manifolds come with the ball vales and crimp
connectors in place ready for installation. The ball valves also allow for flow in individual loops to
be adjusted.
14 D
ROP
M
ANIFOLD WITH
C
RIMP
C
ONNECTORS
(28143 – 3 /
8
” PEX, 28142 - ½” PEX)
This manifold is designed to be used a return manifold. Crimp PEX fittings come
soldered in place for either 3 /
8
” or ½” PEX.