D-Link DSL-500T - Manual (Page 30)

DSL-500T ADSL Router User’s Guide
18
DSL (Modulation) Settings
The DSL Setup menu is used to change the Modulation Type used for the ADSL connection. This setting should
only be changed if your service provider has given explicit instructions to change it.
Note
Do not change the Modulation type used unless you have been instructed to do so. If
this setting is not configured properly, the Router will not work.
Figure 3-4. DSL Setup menu (change modulation type)
If you are instructed by your ISP to change the Modulation type is used for your service, select the desired
modulation type and then click Apply. The modulation types available are T1413, G.DMT, GLITE and
MMODE. By default, the Router will automatically detect the modulation used; this setting is listed as MMODE
(Multi-mode).