Daitsu LCD 32 - Manual (Page 16)

16
Storing Channels in Memory
Press the MENU( ) button.
Press the (¥Š) button to select CHANNEL group and press
the OK button.
Press the ( ›‚ ) button to select COLOUR SYSTEM.
Then press the OK or (Š) button.
The sub-menu of the COLOUR SYSTEM function appears.
Press the ( ›‚ ) button to select the appropriate colour system.
Then press the OK button.
■ You can change the colour system of the main-picture.
- PAL : PAL system
- SECAM : SECAM system
- AUTO
: This function detects a colour system from the input
signal. You can only use this when you are viewing
a picture from programme number PR 0 (AV), or an
EXT terminal.
■ The colour system is chosen automatically.
However, if the picture is not clear or no colour appears,
choose the colour system manually.
1
2
3
4
CHANNEL
PREVIOUS
EXIT
ADJUST
SELECT
COLOUR SYSTEM
AUTO PROGRAM
EDIT / MANUAL
FAVOURITE SETTING
CHILD LOCK
CHANNEL
PREVIOUS
EXIT
ADJUST
SELECT
COLOUR SYSTEM
AUTO PROGRAM
EDIT / MANUAL
FAVOURITE SETTING
CHILD LOCK
COLOUR SYSTEM
AUTO
PA L
SECAM
PREVIOUS
EXIT
ADJUST
SELECT
UNITED KINGDOM
DEUTSCHLAND
FRANCE
ITALIA
ESPAÑA
NEDERLAND
BELGIUM
IRELAND
SWITZERLAND
DANMARK
SVERIGE
ÖSTERREICH
NORGE
AUSTRALIA
SUOMI
COUNTRY
START
MORE
COLOUR SYSTEM
Press the ( ›‚ ) button to select AUTO PROGRAM.
Then press the OK or (Š) button
Press the (¥Š) button to select COUNTRY, then press the
START( ) button for about 3 seconds.
You can select the countries in following order.
UNITED KINGDOM
➔ DEUTSCHLAND ➔ FRANCE ➔
ITALIA ➔ ESPAÑA ➔ NEDERLAND ➔ BELGIUM ➔
AUSTRALIA ➔ SWITZERLAND ➔ DANMARK ➔
SVERIGE ➔ ÖSTERREICH ➔ NORGE ➔
SUOMI ➔ Other
■ You can stop the Auto tuning by pressing the EXIT( )
button during auto tuning.
■ You can again perform the AUTO PROGRAM function TV
channel automatic registration which was performed in the
“Initial settings”
1
2
AUTO PROGRAM