6” hdmi lcd monitor quickstart guide, Configuration of setting menus – ikan VK5 User Manual
Page 3

www.ikancorp.com
713-272-8822
VK5
5.6” HDMI LCD Monitor QUICKSTART GUIDE
This function recalls user defined values settings .The user setting will remain in memory
indefinitely and can be erased by using the reset option in the main menu.
The DSLR Scaling
3
function will allow users to extend their DSLR camera’s HDMI video
output any option of four – Normal, 3:2, 16:9 or Full Screen – convenience made simple.
Display a crosshair on the center of screen.
The LCD panel in this display has a native display of 1024 x 600 pixels. A signal of any
other resolution is scaled to fit this native resolution. There may be time when it is
desired to view the incoming signal without scaling. Enabling Pixel to Pixel mode turns
off the scaling and displays a 1024x600 pixel window of the original image. Each pixel of
the panel displays one pixel of the original image. The user may use the arrow buttons
on the monitor face to move the window left, right, up and down to see the desired
portion of the image.
The VK5 is equipped with Monochrome Peaking features which highlight the desired
focus area in a bright, red outline. The operator adjusts the focus control until the red
indicator outlines on the desired area are razor sharp, indicating optimal focus. For the
best results, be sure the subject is properly exposed.
The False Color1 feature utilizes a full spectrum of assigned color indicators, ensuring
flawless shot exposure. As the camera Iris is adjusted, the subject of the image will
change color based on specific brightness values indicating optimal exposure. See
included chart for color assignments.
As an additional tool associated with the VK5’s False Color1 feature, ikan’s exclusive
Adjustable Under Exposure and Over Exposed Waning feature gives the operator full
control of the VK5 False Color1 brightness values. By setting the preferred IRE exposure
limits, the operator is warned when the image exposure is exceeding or falling under
the preset IRE limit, providing customizable, full image exposure control.
The VK5 offers adjustable upper Clip Guide2 levels to accurately display overexposed
images in any shooting condition. The operator simply assigns the upper IRE to their
preference and any exposure over the set IRE limit will flash in a vivid purple, indicating
only the over exposed area.
CONFIGURATION OF SETTING MENUS
GUIDES
Guides Full
OFF / Mode 1 / Mode 2 / Mode 3
Guides 4:3
OFF / Mode 1 / Mode 2
G. Background
Normal / Half / Black
Crosshair
Off
/
On
Return
VIDEO CONFIGURATION
Contrast
0-100
Brightness
0-100
Tint
0-100
Chroma
0-100
Sharpness
0-100
RGB Setup
User - R
User
-
G
User
-
B
Offset
R
Offset
G
Offset
B
Return
Return
SYSTEM CONFIGURATION
Menu
Duration
5-60
second
Menu
Setup
User
1-5
Reset
Return
FUNCTION SETUP
Luma Under Warn
Luma Over Warn
F1
Key
False
Color1
Clip
Guide
2
DSLR
Scaling
3
Check
Field
Peaking
Aspect
Guides
Crosshair
Pixel
to
pixel
F2
Key
False
Color1
Clip
Guide2
DSLR
Scaling
3
Check
Field
Peaking
Aspect
Guides
Crosshair
Pixel
to
pixel
EXIT
Notes:
1 False Color (for HDMI only)
2 Clip Guide (for HDMI only)
3 DSLR Scaling (for HDMI only)