ikan MS21 - Manual (Page 3)

Safety Instructions
• To help avoid damaging your monitor, connect only one power (AC or DC) in
operation.
• Rough handling of product may cause physical damage or malfunction.
• Never insert anything metallic into the monitor openings. Doing so may create
the danger of electric shock.
• To avoid electric shock, never touch the inside of the monitor. Only a qualified
should open the monitor’s case.
• Openings in the monitor cabinet are provided for ventilation. To prevent
overheating, these openings should not be blocked or covered.
• Put your monitor in a location with low humidity and a minimum of dust. Avoid
places like damp basement or dusty hallways.
• Place the monitor on a solid surface and treat it carefully. The screen is made of
glass and can be damaged if dropped or sharply hit.
• Do not attempt to remove the back cover, as you will be exposed to a shock
hazard. The back cover should only be removed by qualified service personnel.
• Unplug the monitor power before you connect external devices to the monitor.
• If your monitor does not operate normally, or if there are any unusual sounds or
smells coning from it, unplug it immediately and contact us.
• Please do not disassemble the monitor. No service will be provided in that case.
• Displaying fixed picture for a long time may cause an afterimage or dead spots.
To recover LCD pixels, display whole white picture on screen for a n hour or
two and pixels will be recovered.
• No service will be provided for user’s own color calibration.
3