IHSE USA 472 Series DXXi KVM Extender - Manual (Page 43)

Specifications
2011-06-01 43
Operation of several devices:
The serial interface transmits 6 signals (3 for each direction). Normally,
4 of the 6 signals are handshake signals (in addition to RxD and TxD).
The following configurations, however, can be realized using special
adapter splitting cables:
 Three single 2-wire transmissions
 Two transmissions with a handshake signal
 A serial mouse and a single 2-wire transmission.
In this case, choose X-ON / X-OFF software handshake for traffic control
at printer and PC.
Connection Format DTE (Data Terminal Equipment)
Speed
Up to 19,200 Baud
Data Format
Format independent
Data Transmission
 RxD (Receive Data)
 TxD (Transmit Data)
Traffic Control The following signals are transmitted
(hardware handshake):

RTS (Request To Send)
 CTS (Clear To Send)
 DTR (Data Terminal Ready)
 DSR (Data Set Ready)
Pos: 45 /806-IHSE/Technische Daten/Schnittstellen/Analoge Audio-Schnittstelle @ 5\mod_1291127716734_6.doc @ 44846 @ 3