IHSE USA 472 Series DXXi KVM Extender - Manual (Page 39)

Configuration
2011-06-01 39
5.2 Command Mode
During normal use, the console keyboard functions in the usual manner.
However, for all KVM Extenders with switching function and USB-HID
support, you can set the keyboard into a Command Mode by using a
specific 'Hot Key' sequence. While in Command Mode, several functions
are performed via keyboard commands. To exit Command Mode, press
.
While in Command Mode, the LEDs Shift and Scroll on the console
keyboard will flash.
In Command Mode normal keyboard and mouse operation will cease.
Only selected keyboard commands are available.
The following table lists the keyboard commands to enter and to exit
Command Mode and to change the 'Hot Key' sequence:
Function Keyboard Command
+ + ('Hot
Key') (until 20.11.2009) Enter Command Mode (default)
2x ('Hot Key')
(since 20.11.2009)
Exit Command Mode
Change 'Hot Key' sequence + + ,
<'Hot Key' Code>,
The 'Hot Key' sequence to enter Command Mode can be changed. The
following table lists the 'Hot Key' Codes for the available key sequences:
'Hot Key'-Code 'Hot Key'
1 + +
2 2x
3 2x
4 2x
5 2x
6 2x
7 2x
8 2x
Pos: 34 /806-IHSE/Betrieb/UEB_Betrieb @ 5\mod_1278577614980_6.doc @ 41970 @ 1