Appendix c : how to flash the image to emmc, Appendix d –useful links – IBASE SMARC-EVK1 User Manual
Page 92
66
SMARC Evaluation Kit
8. Appendix C : how to Flash the image to eMMC
(for advanced user only) You can flash the current SD image system (standard or
customized by user) to eMMC by following method.
Use “fdisk -l” command to check current storage devices, current boot device is
represented as /dev/mmcblk1, SMARC module’s eMMC device is /dev/mmcblk0
#sudo fdisk –l
Flash Module eMMC:
# cd flash_emmc/rp100_emmc
# ./fsl-sdcard-partition.sh –f /dev/mmcblk0
Remember to check the boot set up of dip switch is “boot from SMARC’s eMMC”,
then, you can boot from eMMC with the above concept.
9. Appendix D –Useful links
For more information about Android, please visit:
For more information Freescale i.MX6 CPU , please visit: