Hypertherm RT60 Retrofit Torch - Manual (Page 27)

SETUP
3-4 RT60 / RT60M Operator Manual
0
Pigtail from Machine
Torch Lead
On/Off Pendant
RT60M ON/OFF Pendant Connection
The RT60M torch lead is supplied with a pigtail so that the on/off pendant may be used. If you want to use a
different on/off switch configuration, note that the wiring configuration to the 3-socket female receptacle on the
pigtail is as follows:
RT60M Torch Alignment
Mount the machine torch perpendicular to the workpiece in order to get a
vertical cut. Use a square to align the torch at 0° and 90°.
RT60M Machine Torch Setup
Socket A White Wire
Socket B Not Used
Socket C Black Wire
Torch
0°
90°