Hypertherm RT60 Retrofit Torch - Manual (Page 25)

SETUP
3-2 RT60 / RT60M Operator Manual
0
Upon Receipt
1. Check that all items on your order have been received. Contact your distributor if any items are missing or
damaged.
2. If there is evidence of damage, refer to Claims, below. All communications regarding this equipment must include
the model number and serial number located on the back of the power supply.
3. Read the Safety section of this manual before setting up and operating this Hypertherm system.
Claims
Claims for damage during shipment: If your unit was damaged during shipment, you must file a claim with the
carrier. Hypertherm will furnish you with a copy of the bill of lading upon request. If you need additional assistance,
call the nearest Hypertherm office listed in the front of this manual.
Claims for defective or missing merchandise: If any component is missing or defective, contact your Hypertherm
distributor. If you need additional assistance, call the nearest Hypertherm office listed in the front of this manual.
Contents of Box
Part Number Description
083215 RT60 25' hand torch assembly
083216 RT60 50' hand torch assembly
083217 RT60M 25' machine torch assembly
083218 RT60M 50' machine torch assembly