Honestech VHS to DVD 2.0 Deluxe - Manual (Page 27)

27. VHS to DVD 2.0 Deluxe
During the EDIT phase, you can trim out scene from your recorded video. You can also cut your
movies into multiple scenes and add them into storybook to add transition effects between each
scene. When you have multiple scenes captured, you can combine them into one continuous clip
with transitions effects. In order for you to trim or cut part of the scene from the captured clips, you
will need to create two separate clips, one before the part of the clip to be trimmed and another for
the scenes after the part of the clip to be trimmed. You can even combine two separate clips into one
scene using the storyboard.
Player control tools
Mark In & Mark Out scroll bar
– This scroll bar can be moved from left to right to change the Mark
In and Mark Out locations for the video clips to be trimmed or Zoom In to.
Mark In button
– To specify the beginning of the clip you want to keep.
Mark Out button – To specify the end of the clip you want to keep.
Play scroll bar
– This scroll bar can be used to easily move within the video clip to quickly preview.
You can also use the Play scroll bar to assign the Mark In and Mark Out point of the movie clip.
Mark Clear button
– To remove Mark In or Mark Out specified.
Zoom In button
– to zoom into Mark In and Mark Out location for more precise trimming.
Following player control tool are provided for easier and more accurate trimming.
Play the movie clip from where the play scroll bar is located.
Stop the movie clip.
Go to beginning of the movie clip.
Move single frame backward in the movie clip.
Move single frame forward in the movie clip.
Go to the end of the movie clip.
After you are satisfied with Mark In and Mark Out location, you can use Cut tool to add the
clip within the Mark In and Mark Out into the Storyboard as shown below.