Hoefer HE33 - Manual (Page 14)

• p6

Once the gel is set, remove the comb carefully.
Partially lift and slightly tilt the comb at one end
and then slowly withdraw it from the gel. (Pulling the
comb straight up creates a vacuum in the wells that
may lift the gel out of the tray.)

Remove the running tray and gel by grasping the
handles of the tray and pressing against one of the
foam pads. Once the tray clears the opposite pad,
lift it out. Transfer the running tray and gel to the
chilled base.
comb back
comb
screws (2)
Fig. 3. A comb back, which fits
onto the rim of the casting tray,
positions the comb in the gel. Two
screws hold the adjustable comb.
For twice as many wells, a second
comb can be placed in the center
of the gel.