Highgear Axio Max - Manual (Page 10)

E
N
G
LI
SH
10
Button Functions
1. ADJUST Button
• Press and hold for 3 seconds to enter mode settings (except in CHRON and DATA modes).
• Exit settings at any time.
• Reset Chronograph without saving.
• Press and hold for 3 seconds to clear last run from DATA mode.
• Press and hold for 6 seconds to clear ALL runs from DATA mode.
2. MODE Button
• Press once to toggle through mode selections.
• Move to next setting during adjustment in any mode.
3. START / + Button ( RECALL / + )
NOTE: START / + is labeled as RECALL / + on AXIO max.
• Press to view alternate time zone in TIME mode.
• Press and hold for 3 seconds to switch to alternate time zone.
• Press to view alternate unit in ALTI-BARO mode.
• Press and hold for 3 seconds to switch units in ALTI-BARO mode.
• Press to view next data point in DATA mode.
• Press once to increase setting value.
• Press to recall the compass in COMPASS mode.
4. STOP / - Button ( VIEW / - )
NOTE: STOP / - is labeled as VIEW / - on AXIO max.
• Press to switch display view in TIME and ALTI-BARO modes.
• Press and hold for 3 seconds to save run in CHRON mode.
• Press to select run data in DATA mode.
• Press once to decrease setting value.
• Press to recall the compass in COMPASS mode.